| |
|
• New HD Local Network Launches on DISH Network
|
• Mount a DISH Pro Single for reception of the 129 orbital location
|
• Assembly includes: (1) DPP44 Switch (DPP44) (1) Dish Pro Single Output LNB (101001) (1) Mast & Struts
|
• Connect the four LNBF output ports to a DPP44 Switch
>
DISH 1000+ allows you to receive programming from three orbital locations; 110°, 119°, and 129° using a dish antenna size similar to DISH 500+.
Dimensions:
1 5/8" mounting mast
23.8”h x 30.9"w dish face
Standard Configuration:
DISH 1000+ includes a DP Dual Band LNBF and two DP Dual LNBF. A DPP 44 switch must be used in all DISH 1000+ installations (up to 4 DPP receivers).
DP Dual Band LNBF for orbital locations; 118.7°, 119°
DP Dual LNBF for orbital location; 129°,
DP Dual LNBF for orbital location; 110°,
Models 2800, 6000, and 721 may display the 118.7 orbital locations in the Point Dish and Installation Summery screens as “119K”.
Others will display the 118.7° orbital locations as "118" in these screens.
* All DISH 1000+ will need to be installed with a DPP 44 switch.
Receivers NOT compatible with DISH 1000+: (*no 129/118.7 support)
1000, 2000, 3000, 4000, 5000, JVC-IRR, DISHPlayer 7100/7200
International Services Moving to 118.7 Orbital Slot DISH Network will begin broadcasting the following International languages from the 118.7 orbital location. This new orbital location will be viewed with a DISH 500+ (which also includes 110/119) or with a DISH 1000+ (including 110/119/129).
International languages moving to 118.7 orbital location:
* South Asian – Kannada
* South Asian – Bangla
* South Asian – Malayalam
* South Asian – Telugu
* French
* African
* Armenian
* Filipino
* German
* Chinese
* Korean
Installation Tips
• When using a pole mount for the 500+/ 1000+, a six to eight foot pipe made of 16
gauge or thicker galvanized steel with a 1 5/8” outer diameter must be used. The
pipe must have at least 3 feet buried in concrete.
• Struts are included with the mast kit (use is optional).
• The skew angles differ slightly between 500+ and the 1000+. Use the correct
peaking angles from the DISH 500+ and DISH 1000+ Installation Instructions.
