| The LA145A-T is used when DBS Ka/Ku or ATSC off-air signals are required at multiple locations connected via coax cable. Signal loss must be off-set. Model LA145A-T may be placed after a DBS dish or ATSC antenna to extend the signals the equivalent of 150 feet of RG6 cable. Indoor/Outdoor 175 to 2150 MHz DBS/ATSC line powered amplifiers with 14dB gain and optional external powering.
ATSC/Ka/Ku bandwidth....175 to 2150 MHz
- High Input Ability....-24dBm
- DC & 22 kHz/DiSeQc passing...low insertion loss
- Indoor/Outdoor case....Die Cast Aluminum
- Multiple power options....line or external DC
Specifications....Typical....QC Limit Gain
- 175 MHz....10dB....9dB
- 250 MHz....10dB....9dB
- 950 MHz....13dB....11dB
- 2150 MHz....16dB....14dB
Maximum Output
- (67 equal transponders)....-10dBm
Maximum Output Power
- IM2 with 2 tones @ 1dBm....-35 dBc....-32 dBc min
- IM2 with 2 tones @ 1dbm....-50 dBc....-47 dBc min
Pass Band Flatness
- Any 24 MHz band....0.1 dB....0.2 dB
- Input Return Loss....14 dB....11 dB
- Output Return Loss....13 dB....11 dB
- Noise Figure....6 dB....7 dB
Power Specifications
- Voltage: 12 to 20 VDC
- Current: 55 mA/channel
Mechanical Specifications
- Dimensions: 6" x 4.75" x 0.875"
|
